You are here: Home / EMC Systems / EMC Test Systems / Immunity Tests / Surge

Surge

Below you find short descriptions of EMC PARTNER’s products for surge tests

  • up to 4 kV (This test circuit is also included in the One Box EMC Test Station.)
  • up to 6 kV
  • up to 12 kV
  • up to 18 kV
  • coupling on three phases

Surge up to 4 kV

TRA3000

Waveforms (Range): Fast Transient, IEC 61000-4-4 Ed.2 EFT(4.4kV), 1MHz burst, SURGE IEC 61000-4-5 Ed.2 CWG 1.2/50µs (4.1kV), 8/20µs (2.05kA). DIPS IEC 61000-4-11 Ed.2. Interr. up to 16A; Variation up to 6A; CM IEC 61000-4-16 Ed.1.2, up to 35V for all continuous a.c/d.c,f.
Coupling: a.c.: single phase 16 A/260 V
d.c.: 16 A/110 V
Standards: IEC 61000-4-2, -4, -5, -8, -9, -11, -16, -29
Required Accessory: CNEFT1000 coupling clamp
EXT-TRA3000E
EXT-TRA3000 C-SHORT
EXT-TRA3000 D – 29 D
EXT-TRA3000 D – 29 I

Surge up to 6 kV


MIG0603IN – Surge up to 6 kV

Waveforms (Range): 1.2/50 µs (0.25 to 6.2 kV), 8/20 µs (0.125 kA up to 3.1 kA )
Coupling: single phase 16 A
Standards: IEC 61000-4-5, ITU K.17
Options: Ring wave 0.5 µs/100 kHz, 10/700 µs
Accessory: CDNKIT1000, CDN2000-06-32, CDN2000A-06-32, CDN2000A-06-63,CDN.-A-3P100-X

MIG0603IN1 – Surge up to 6 kV

Waveforms (Range): Waveform 1:
1.2/50 µs (0.25 to 6.2 kV), 8/20 µs (0.125 kA up to 3.1 kA )Waveform 2:
Ring 100 kHz (up to 6 kV)
Coupling: single phase 16 A
Standards: IEC 61000-4-5, ITU K.17,IEC 61000-4-12
Accessory: CDNKIT1000, CDN2000-06-32, CDN2000A-06-32, CDN2000A-06-63,CDN.-A-3P100-X

MIG0603IN3 – Surge up to 6 kV

Waveforms (Range): Waveform 1:
1.2/50 µs (0.25 to 6.2 kV), 8/20 µs (0.125 kA up to 3.1 kA )Waveform 2:
Ring 100kHz (up to 6 kV)

Waveform 3:
10/700µs Telecom wave
Coupling: single phase 16 A
Standards: IEC 61000-4-5, ITU K.17, IEC 61000-4-12, ANSI C62.41, ITU K.44
Accessory: CDNKIT1000, CDN2000-06-32, CDN2000A-06-32, CDN2000A-06-63,CDN.-A-3P100-X

MIG0603IN4 – Surge up to 6 kV

Waveforms (Range): Ring 100 kHz (up to 6 kV)
Coupling: single phase 16 A
Standards: IEC 61000-4-12, ANSI C62.41
Accessory: CDNKIT1000, CDN2000-06-32, CDN2000A-06-32, CDN2000A-06-63

CDN2000-06-32 and CDN2000A-06-32

Rating: Supply Voltage (a.c. or d.c.):
L to N/PE 240 V, L to L 480 V

Supply Current:
Continuous operation (a.c. or d.c.): 3 x 32 A
Continuous operation (d.c.): 1 x 64 A

Test Voltages:
Surge voltage: maximum 6.6 kV
Ring voltage: maximum 6.6 kV
EFT voltage: maximum 4.4 kV



Control: RS232 connection from the rear side of the TRA2000 or MIG0603INx to the CDN2000A-06-32

For the selection of the coupling paths see the displays on the right.

Power supply: 90 to 240 V and 50/60Hz
Standards: IEC 61000-4-5, ANSI/IEEE C62.41 and C62.45, IEC 61000-4-4
Option: 480V: for power supply L to N/PE 280 V and L to L 480 V
For use with these generators: TRA2004, TRA3000
TRA2006, MIG0603IN,
MIG0603IN1, MIG0603IN3,
MIG0603IN4

CDN200A-06-63

Rating: Supply Voltage (a.c. or d.c.):
L to N/PE 280 V, L to L 480 V

Supply Current:
Continuous operation (a.c. or d.c.):3 x 63 A
Continuous operation (d.c.): 3 x 30 A

Test Voltages:
Surge voltage: maximum 6.6 kV
Ring voltage: maximum 6.6 kV
EFT voltage: maximum 4.4 kV



Control: RS232 connection from the rear side of the TRA2000/TRA3000 or MIG0603INx to the CDN2000A-06-63

For the selection of the coupling paths see the displays on the right.

Power supply: 90 to 240 V and 50/60Hz
Standards: IEC 61000-4-5, ANSI/IEEE C62.41 and C62.45, IEC 61000-4-4, EN-61000-4-4, EN 61000-4-5, IEC 61000-4-12, Ed.2
For use with these generators: TRA2000, TRA2004, TRA3000
TRA2006, MIG0603IN,
MIG0603IN1, MIG0603IN3,
MIG0603IN4

CDN-A-3P100-480

Rating: Supply Voltage (a.c.):
L to N/PE 280 V, L to L 480 V

Supply Current:
Continuous operation (a.c.): 3 x 100A
Continuous operation (d.c.): 3 x 63A

Test Voltages:
Surge voltage: maximum 6.6 kV
EFT voltage: maximum 4.4 kV



Control: RS232 connection from the rear side of the TRA2000/TRA3000 or MIG0603INx to the CDN-A-3P100-480

For the selection of the coupling paths see the displays on the right.

Power supply: 90 to 240 V and 50/60Hz
Standards: IEC 61000-4-5, ANSI/IEEE C62.41 and C62.45, IEC 61000-4-4, EN-61000-4-4 Ed. 2.0b, EN 61000-4-5, IEC 61000-4-12 Ed.2
For use with these generators: TRA2000, TRA2004, TRA3000
TRA2006, MIG0603IN,
MIG0603IN1, MIG0603IN3,
MIG0603IN4

CDN-A-3P100-690

Rating: Supply Voltage (a.c.):
L to N/PE 400 V, L to L 690 V

Supply Current:
Continuous operation (a.c.): 3 x 100A
Continuous operation (d.c.): 3 x 63A

Test Voltages:
Surge voltage: maximum 6.6 kV
EFT voltage: maximum 4.4 kV



Control: RS232 connection from the rear side of the TRA2000/TRA3000 or MIG0603INx to the CDN-A-3P100-690

For the selection of the coupling paths see the displays on the right.

Power supply: 90 to 240 V and 50/60Hz
Standards: IEC 61000-4-5, ANSI/IEEE C62.41 and C62.45, IEC 61000-4-4, EN-61000-4-4 Ed. 2.0b, EN 61000-4-5, IEC 61000-4-12 Ed.2
For use with these generators: TRA2000, TRA2004, TRA3000
TRA2006, MIG0603IN,
MIG0603IN1, MIG0603IN3,
MIG0603IN4

MIG0603-3P100 – Surge up to 6 kV onto 100 A a.c.

Waveforms (Range): 1.2/50 µs (0.25 up to 6.2 kV)
8/20 µs (0.125 kA up to 3.1 kA)
Coupling: three phase 100 A
Standards: IEC 61000-4-5
Option: EFT

Surge up to 12 kV

MIG1206 – Surge up to 12 kV

Waveforms:
(Range)		 CWG 1.2/50, 8/20 µs (12 kV, 6 kA)
Standards: IEC 61000-4-5, ANSI C62.41, ITU-T K.44, K.20, K.21
Coupling using CDN-MIG12-32: Power supply a.c. L-L/N 480V, 32 A
Power supply a.c. L/N to PE 280 V
Power supply d.c. 280 V, 32 A
Accessories: TEMA (Test Manager Software)

MIG1206-xP-32

The MIG1206-xP-32 is a hybrid generator with two voltage wave shapes; 1,2/50µs at “no load” and a current wave form 8/20µs at short circuit. An integrated automatic coupling/de-coupling network completes the system.

Waveforms: CWG 1.2/50 µs, 8/20 µs (12 kV, 6 kA)
Coupling: 1-Phase: 280V
L-PE, N-PE, L-N
3-Phase: 480V
L1-PE, L2-PE, L3-PE, N-PE
L1-L2, L2-L3, L1-L3, L1-N, L2-N, L3-N
L1 + L2 or L1 + L3 etc. to any other line

Supply Current:
Continuous operation: (a.c.) 32A
Continuous operation: (d.c.) 25A
Standards: IEC61000-4-5
ANSI C62.41
IEC61643-1
IEC60060-1
Accessories: TC-MIG24 HL test cabinet:
High voltage outputs on front of MIG1206-xP-32
Component and circuit test up to 12kV within the test cabinet

Surge up to 18 kV

MIG1809 – Surge up to 18 kV

Waveforms:
(Range)		 CWG 1.2/50, 8/20 µs (18 kV, 9 kA)
Standards: IEC 61000-4-5, ANSI C62.41, ITU-T K.44, K.20, K.21
Accessories: TEMA (Test Manager Software)